• Full encapsulation, no blind spots: Powder melts and flows out on the preheated conductor, covering edges, bends, hole interiors and shadow areas — unlike spray coating, which leaves thin edges and exposed spots
• Thick film, high dielectric strength: 0.2–0.8mm per side, material ≥30–44 kV/mm, 2–3kV hipot on every part, 10kV class available
• Integral film, no peeling: Coating cross-links with the conductor into one body — no cracking or peeling after 90° bending, vibration or thermal cycling; more reliable than heat-shrink tube (cracks) or sleeves (shift)
• Closer phase spacing: Full insulation allows shorter bar-to-bar and bar-to-enclosure distances, raising space utilization and allowing larger cross-section in the same cabinet
• Prevents short circuit and tracking: Blocks foreign-object bridging, accidental tool contact, condensation tracking and rodent intrusion
• Flame retardant, halogen-free: UL94 V-0, halogen-free, RoHS/REACH compliant, low smoke and low toxicity, meets EN 45545-2 HL3 for rail
• Environmental resistance: Salt spray, damp heat, oil, refrigerant and weak acid/alkali resistance; suppresses copper verdigris — suitable for coastal, outdoor and ESS container use
• Mechanical protection: Hard cured film resists impact, abrasion and scratching during transport and assembly, reducing site rework
• No secondary insulation needed: Eliminates heat-shrink tube, insulating paper and barriers — fewer assembly steps and a simpler BOM
• Appearance & identification: Smooth gloss surface, color-coded phases and HV warning, better cabinet appearance and maintainability
• Controllable accuracy: Exposed copper masked per drawing with ±1mm tolerance; contact faces keep full conductivity
An energy storage cabinet wiring terminal is a small metal part that buyers usually select on current rating, material, and price, yet the problems it causes are rarely about carrying current at all. ...
READ MORE
English
Español











